YZG/FZG Series Vacuum Drier

Detailed Product Description

Descriptions:

1.Vacuum dry is to let raw material to be dried at vacuum condition heating and drying. It use vacuum pump to pump damp and make the working chamber from vacuum status. Therefore the dary speed of raw material is quickened and the energy is saved greatly.

2.Vacuum dry is divided into static and dynamic drier. Model FZG round vacuum drier or Model FZG square vacuum drier belongs to static drier. Model SZG double cone rotating vacuum drier belongs to dynamic drier. When raw material is dried in static drier, raw material is in static state and its shape can not destroy. Before drying, it can carry out the treatment of disinfection. When raw material is dried in dynamic drier, raw material is turned over ceaselessly. So it can be dried better and more uniformly.

3.In the state of vacuum, the boiling point of raw material will be dropped. Therefore it is suitable for drying raw materials that are unstable or thermal sensitive. The vacuum drier also has good airtightness. So it is also suitable for drying raw materials that contain strong irritative and toxic gases and the solvent needs to recover.

4.The vacuum drier has been wide use for pharmaceutical industry, chemical industry, foodstuff industry, dyestuff industry and so on. Air is in comformity with the requirements of GMP.

 

Technical Parameters:

       

Name/Specification	YZG-600 Φ×L	YZG-800 Φ×L	YZG-1000 Φ×L	YZG-1400 Φ×L	YZG-15 L×W×H
inside size of chamber(mm)	600×976	800×1274	1000×1527	1400×2054	1500×1400×1220
size of chamber(mm)	1153×810×1020	1700×1040×1335	1693×1190×1500	2386×1657×1920	1513×1924×2060
layers of baking shelf	4	4	6	8	8
layer of baking shelf(mm)	81	82	102	102	122
size of baking disk(mm)	310×600×45	460×600×45	460×640×45	460×640×45	460×640×45
number of baking disk	4	8	12	32	32
permitted pressure inside the pipe of baking shelf(MPa)	≤0.784(8kgf/cm2)	≤0.784 >	≤0.784	≤0.784	≤0.784
temperature inside chamber(°C)	≤150	≤150	≤150	≤150	≤150
vacuum in idle inside chamber	≤30
when vacuum is 30 torr and the heating temperature is 1100C,vaporized rate of water(kg/m2.h)	7.2
if use condensator,type and power of vacuum pump(kW)	2X-15A 2kW	2X-30A 3kW	W3 5.5kW	W3 7.5kW	2X-70A 7.5kW
if not use condensator,type and power of vacuum pump(kW)	SK-0.8 2.2kW	SK-3 5.5kW	SK-3 5.5kW	SK-3 7.5kW	SK-3 7.5kW
weight of drying chamber(kg)	250	600	800	1000	2100

The above mentioned data is for reference only.If having special requirements,the factory can provide the service of consultation and design.

 

Notice In Order:

1. When order, please choose suitable vacuum drier in accordance with the physical property, primary moisture and final moisture of raw material to be dried and factors such as temperature, vacuum, drying amount and time and so on. Vacuum drier with same model has four heating ways, i.e. steam, hot water, heat conduction oil and electric heat. For example, in order to increase the output of product, the drying layer can be increased suitably. Please. Tell our factory in time.
2. The auxiliary parts of vacuum drying system indicated in user's Manual can be supplied and installed by our factory. Please indicate them when order.
3. If having special requirements, our factory can also design, manufacture and install as request.
4. For the equipment, our factory will carry out guarantee of repair replacement and refund of substandard products. All subassembly can be supplied in a long time. Please put your mind at rest.